Before you Begin: Washer must be in Manual Mode Steps: Use the PERM PRESS/WARM (∧) or DELICATES/COLD (∨) buttons to choose PrOg and press Start. Select dEn1 with the buttons and press Start. The fourth digit of the value flashes. Use the buttons…
Before you begin: Make sure the washer is in Manual Mode Steps: From Manual Mode, use the PERM PRESS/WARM (∧) or DELICATES/COLD (∨) buttons to select PrOg and press Start. Select AtS with the PERM PRESS/WARM (∧) or DELICATES/COLD (∨) buttons and…
Before you begin: Ensure the washer is off and not running a cycle. Close the coin drawer. To Begin Open the service door. Press and hold the NORMAL/HOT and NORMAL/WARM keypads simultaneously. The display will show “rAPd”. Use the PERM…
Enter Special Mode: Refer to your manual for instructions on entering this mode, usually involving holding specific button combinations. Access Clock Programming: Press and hold HIGH TEMP and MED TEMP buttons. “SIg” appears. Use LOW TEMP or NO…
Before you start: Make sure your dryer is in Special Mode Steps: Hold HIGH TEMP and MED TEMP buttons. “SIg” appears. Press LOW TEMP or NO HEAT until “CFg” shows up. Press “START” twice. See the current control configuration code. Use LOW…