Mountain Electronics logo

Set Real-Time Clock (Minutes, Hours, Day, Date, Month, and Year)

by | Feb 15, 2024 | Alliance 5 Button Middle Start Dryer Control Board

Skip to main content
How Can We Help?

Search for answers or browse our knowledge base.

Created:
Last Updated:
Print
You are here:
← Back
  1. Enter Special Mode: Refer to your manual for instructions on entering this mode, usually involving holding specific button combinations.

  2. Access Clock Programming:

    • Press and hold HIGH TEMP and MED TEMP buttons. “SIg” appears.
    • Use LOW TEMP or NO HEAT to scroll until “CIn” shows up. Press START.

  3. Set Minutes:

    • The current minutes display. Use LOW TEMP or NO HEAT to adjust the minutes (e.g., press LOW TEMP to increase, NO HEAT to decrease).
    • Press START to confirm the minutes.

  4. Set Hours:

    • “CHr” appears. Press START.
    • The current hours display. Use LOW TEMP or NO HEAT to adjust the hours.
    • Press START to confirm the hours.
  5. Pick the Day:
    •  “CdA” appears. Press START
    • The current day displays (Sunday = 001, Monday = 002, etc.). Use LOW TEMP or NO HEAT to change the day.
    • Press START to confirm the day.
  6. Set the Date:
    • “CdE” appears. Press START
    • The current day of the month appears. Use LOW TEMP or NO HEAT to change the day.
    • Press START to confirm the day.
  7. Set the Month:
    • “COn” appears. Press START
    • The current month appears. Use LOW TEMP or NO HEAT to change the month.
    • Press START to confirm the month.
  8. Set the Year:
    • “CYr” appears. Press START
    • The current year appears. Use LOW TEMP or NO HEAT to change the year.
    • Press START to confirm the year.

  9. Exit Special Mode: Press and hold HIGH TEMP and MED TEMP again. The dryer returns to “Ready” mode.

Last Updated:
Tags: