Vend Price (AtS)

Steps:

1. Ensure the washer is in Manual Mode

2. Open the Programming Menu:

   • Press the NORMAL WARM (∧) or DELICATES COLD (∨) button repeatedly until “Prog” appears on the display.
   • Press the START (enter) button. The display will show “AtS”.

3. Select Price Option:

   • Press the START (enter) button again. All LEDs will light up, indicating which cycle/temperature price you’re about to program.

4. Adjust Price Value:

   • Use the NORMAL WARM (∧) or DELICATES COLD (∨) button to change the value of the fifth digit (which appears flashing).
   • You can set the price from 0 to 65,535 (in cents). The default is 200 (equivalent to $2.00).
   • Press the START (enter) button to confirm the fifth digit and move to the next one.

5. Set Remaining Digits:

   • The active digit will now flash. Use the NORMAL WARM (∧) or DELICATES COLD (∨) button to adjust it.
   • Press the START (enter) button to confirm and move to the next digit.
   • Repeat for all four remaining digits.

6. Save and Exit:

   • Once you’ve set all digits to the desired price, press the START (enter) button one last time. This saves the new price and takes you to the next programming option.

   • Press the PERM PRESS WARM button, and the washer will revert to Ready Mode.