Testing Machine and MDC Functions

Use this to run diagnostics tests on various machine functions without servicing the machine. 

1. Enter Manual Mode: Refer to “Entering Manual Mode“
2. Find “dIAg”: Press LOW TEMP (∧) or DELICATES (∨) until “dIAg” appears in the Four-Digit Display. 
3. Initiate Testing Feature: Press START (enter). “d001” will appear in the display. 
4. Scroll through tests: Use LOW TEMP (∧) or DELICATES (∨) to browse available tests. 
5. Refer to the table above to find the test number you need 
6. Initiate test: Press START (enter) when the desired test number is displayed. 
7. Exiting the Testing Feature: Press and hold HIGH TEMP and MED TEMP simultaneously. The display will revert to the previous mode.