Start Pulse Value (PLSE)

Steps:

1. Ensure the washer is in Manual Mode.

2. Open the Programming Menu:

   • Press the NORMAL WARM (∧) or DELICATES COLD (∨) button repeatedly until “Prog” appears on the display.
   • Press the START (enter) button. The display will show “AtS”.

3. Select Start Pulse Option:

   • Use the NORMAL WARM (∧) or DELICATES COLD (∨) button to scroll until “PLSE” appears on the display.
   • Press the START (enter) button.

4. Adjust Pulse Value:

   • The fifth digit of the value will now flash. This represents the credit applied per pulse (in cents).
   • Use the NORMAL WARM (∧) or DELICATES COLD (∨) button to adjust it (range: 1-65,535).
   • Press the START (enter) button to confirm the fifth digit and move to the next one.

5. Set Remaining Digits:

   • The active digit will now flash. Use the buttons to adjust it.
   • Press START (enter) to confirm and move to the next digit.
   • Repeat for all four remaining digits.

6. Save and Exit:

   • Once you’ve set all digits, press the START (enter) button one last time. This saves the new value and takes you to the next option.

   • Press the PERM PRESS WARM button, and the washer will revert to Ready Mode.