Skip to main content
How Can We Help?
Search for answers or browse our knowledge base.
Before you start:
- Make sure your dryer is in Special Mode (check your manual).
Steps:
- Hold HIGH TEMP and MED TEMP buttons. “SIg” appears.
- Press LOW TEMP or NO HEAT until “PCL” shows up.
- Press “START.” See current cool down time for medium heat.
- Use LOW TEMP or NO HEAT to set your desired cool down time in minutes (recommended minimum 3 minutes).
- Press “START” to confirm. Next option (“PdE”) appears.
To exit programming mode: Press HIGH TEMP and MED TEMP buttons simultaneously.