Low Temperature (LO t)

This option lets you set the low temperature cycle. 

1. Enter Manual Mode: Follow the steps in the “Entering Manual Mode” section. 
2. Access programming: Press LOW TEMP (∧) or DELICATES (∨) until “PrOg” appears in the Four-Digit Display, then press START (enter). “AtS” will appear. 
3. Press LOW TEMP (∧) or DELICATES (∨) to find “LO t,” then press START (enter). 
4. Adjust low temperature: The current low temperature setting will appear in the display (either Fahrenheit or Celsius, depending on the Configuration setting). 
5. Use LOW TEMP (∧) or DELICATES (∨) to increase or decrease the temperature to the desired value. 
   1. Temperature range: 100°F to 190°F (38°C to 88°C) in 5°F increments. 
   2. No Heat option: Set to “n H” for a No Heat cycle. 
   3. Default value: 160°F (71°C) 
6. Save changes: Press START (enter) when the correct temperature is displayed. “dELt” (Delicates Temperature) will appear next. 
7. To exit programming: Ensure an option is displayed (not a value). Press and hold HIGH TEMP and MED TEMP simultaneously. The control will return to its previous mode.