Skip to main content
How Can We Help?
Search for answers or browse our knowledge base.
Manual mode can be used to program, test, or retrieve information.
To enter Manual Mode on the Mission Duty Cycle (MDC):
- Confirm machine’s mode, Manual Mode is not accessible during End of Cycle Mode.
- Open service door. Ensure the coin drawer is closed.
- Simultaneously press and hold the HIGH TEMP and MED TEMP keypads.
- “rAPd” should appear on the Four-Digit Display.
- Use the LOW TEMP (∧) or DELICATES (∨) keypad to view available features.
- Press the START (enter) keypad to activate the chosen feature
Available features in Manual Mode:
- Manual Programming
(PrOg) - Manual Read Audit
(AudT) - Diagnostic Tests
(dIAg) - Manual Rapid Advance
(rAPd)