Dip Switch Settings

LEFT PROGRAM SWITCHES      Factory Settings         RIGHT PROGRAM SWITCHES

1. Cool Down Time (minutes) 1.0 1. Normal / Diagnostics
2. Coin Accepter Ratio 1.0 2. N/A
3. Coin Units to Start 1.0 3. Charged Dry / Free Dry
4. Additional Time (minutes) 10:00 4. Beeper Off / Beeper On
5. Low Temperature (°F) 130 5. N/A
6. Permanent Press Temperature (°F) 160 6. Fahrenheit / Celsius Degrees
7. High Temperature (°F) 190 7. N/A
8. Audit (Coin / Cycle Count) 8. 60 Hertz / 50 Hertz

Note: When changing dip switch settings, flip the switch up (“on”), adjust the value using HIGH TEMP (+) or LOW TEMP (-), then flip the switch down (“off”) to save the new value.

Special Case:

$0.25 for 10 min

$0.10 for   4 min

1.  Move switch # 2 on the left bank of dip-switches to the “on” position.
2.  Change value to 2.5
3. Return switch # 2 on the left bank of dip-switches to the “off” position.

1. Move switch # 4 on the left bank of dip-switches to the “on” position.
2. Change value to 4:00
3. Return switch # 4 on the left bank of dip-switches to the “off” position.

1. Press and release Time Set button (pushbutton located left of display)
2. Set time to 4:00
3. Press Reset button