Default Cycle (dCyC)

This option lets you set the default temperature for the machine. It is only available for software version S003 or higher. 

1. Enter Manual Mode: Follow the steps in the “Entering Manual Mode” section. 
2. Access programming: Press LOW TEMP (∧) or DELICATES (∨) until “PrOg” appears in the Four-Digit Display, then press START (enter). “AtS” will appear. 
3. Press LOW TEMP (∧) or DELICATES (∨) to find “dCyC,” then press START (enter). 
4. Select default temperature: The current default temperature will be displayed. 
5. Use LOW TEMP (∧) or DELICATES (∨) to choose the desired default cycle: 
   1. HI (high), nd (medium), LO (low), dEL (delicate) 
6. Save changes: Press START (enter) when the desired cycle is displayed. 
7. To exit programming: Ensure an option is displayed (not a value). Press and hold HIGH TEMP and MED TEMP simultaneously. The control will return to its previous mode of operation.