Default Cycle (dCYC)

Steps:

1. Ensure the washer is in Manual Mode

2. Open the Programming Menu:

   • Press the NORMAL WARM (∧) or DELICATES COLD (∨) button repeatedly until “Prog” appears on the display.
   • Press the START (enter) button. The display will show “AtS”.

3. Select Default Cycle Option:

   • Use the NORMAL WARM (∧) or DELICATES COLD (∨) button to scroll through options until “dCyC” appears on the display.
   • Press the START (enter) button.

4. Choose Your Cycle:

   • A number will appear on the display (current default cycle). Refer to the table below to find the corresponding cycle and its number. The corresponding LEDs will also be lit.

4. Change the Default:

   • Use the NORMAL WARM (∧) or DELICATES COLD (∨) button to choose the desired default cycle number from the table.

5. Save and Exit:

   • Press the START (enter) button to confirm the new default cycle. This value is saved and the next programming option will appear.