Cool Down Time (Cd)

This lets you set the amount of cool down time for any cycle in minutes. 

1. Enter Manual Mode: Follow the steps in the “Entering Manual Mode” section. 
2. Access programming: Press LOW TEMP (∧) or DELICATES (∨) until “PrOg” appears in the Four-Digit Display, then press START (enter). “AtS” will appear. 
3. Press LOW TEMP (∧) or DELICATES (∨) to find “Cd,” then press START (enter). 
4. Adjust cool down time: The current number of minutes set for the cool down time will appear in the display. 
5. Use LOW TEMP (∧) or DELICATES (∨) to increase or decrease the number of minutes to the desired value. 
   1. Note: The cool down time can be set from 1 to 15 minutes. The default value is 1 minute. 
6. Save changes: Press START (enter) when the correct number of minutes is displayed. “C1tO” (Coin #1 TopOff Time [Minutes Per Coin]) will appear next. 
7. To exit programming: Ensure an option is displayed (not a value). Press and hold HIGH TEMP and MED TEMP simultaneously. The control will return to its previous mode.