Coin #2 TopOff Time in Minutes Per Coin (C2tO)

This option is available for machines with a dual coin drop. It allows you to set the topoff time in minutes for the second coin drop.  

1. Enter Manual Mode: Follow the steps in the “Entering Manual Mode” section. 
2. Access programming: Press LOW TEMP (∧) or DELICATES (∨) until “PrOg” appears in the Four-Digit Display, then press START (enter). “AtS” will appear. 
3. Press LOW TEMP (∧) or DELICATES (∨) to find “C2tO,” then press START (enter). 
4. Adjust coin #2 topoff time (minutes): The current number of minutes set for the topoff time will appear in the display. 
5. Use LOW TEMP (∧) or DELICATES (∨) to increase or decrease the number of minutes to the desired value. 
   1. Note: For active topoff, the coin #2 time can be set from 1 to 99 minutes. 
   2. Setting it to 0 minutes disables topoff, requires a full cycle purchase to add time. 
   3. The default value is 40 minutes. 
6. Save changes: Press START (enter) when the correct number of minutes is displayed. 
   1. If seconds are enabled, “2toS” (Coin #2 TopOff Time [Seconds Per Coin]) will appear next. This is only available on software versions S003 or higher. 
   2. If seconds are not enabled, “HI t” (High Temperature) will appear next. 
7. To exit programming: Ensure an option is displayed (not a value). Press and hold HIGH TEMP and MED TEMP simultaneously. The control will return to its previous mode.