Coin #2 Amount (dEn2)

This option is only for machines with a dual coin drop. It allows you to set the value on the coin accepted by the second coin drop. 

1. Enter Manual Mode: Follow the steps in the “Entering Manual Mode” section. 
2. Access programming: Press LOW TEMP (∧) or DELICATES (∨) until “PrOg” appears in the Four-Digit Display, then press START (enter). “AtS” will appear. 
3. Select “dEn2” option: Use LOW TEMP (∧) or DELICATES (∨) to find “dEn2,” then press START (enter). 
4. Adjust Coin #2 amount: The rightmost digit will flash. Use LOW TEMP (∧) to increase or DELICATES (∨) to decrease the value. 
   1. Coin amounts can be set between 0 and 9999. The default Coin #2 amount is 100. 
5. Press START (enter) to save the digit and move to the next one. 
6. Repeat for all four digits. 
7. Once all 4 digits have been entered and you press START (enter) for the last time the new Coin #2 amount will be saved, and the display will show “PLSE” (Start Pulse Value). 
8. To exit programming: Ensure an option is displayed (not a value). Press and hold HIGH TEMP and MED TEMP simultaneously. The control will return to its previous mode.