Coin 1 Value (dEn1)

Steps:

1. Ensure the washer is in Manual Mode
2. Open the Programming Menu:
   1. Press the NORMAL WARM (∧) or DELICATES COLD (∨) button repeatedly until “Prog” appears on the display.
   2. Press the START (enter) button. The display will show “AtS”.
3. Select Coin Value Option:
   1. Use the NORMAL WARM (∧) or DELICATES COLD (∨) button to scroll until “dEn1” appears on the display.
   2. Press the START (enter) button.
4. Adjust Coin Value:
   1. The fifth digit of the value will now flash. This represents the value in cents.
   2. Use the NORMAL WARM (∧) or DELICATES COLD (∨) button to adjust it.
   3. You can set the value from 1 to 65,535 (in cents). The default is 25 (equivalent to $0.25).
   4. Press the START (enter) button to confirm the fifth digit and move to the next one.
5. Set Remaining Digits:
   1. The active digit will now flash. Use the NORMAL WARM (∧) or DELICATES COLD (∨) button to adjust it.
   2. Press the START (enter) button to confirm and move to the next digit.
   3. Repeat for all four remaining digits.
6. Save and Exit:
   1. Once you’ve set all digits to the desired coin value, press the START (enter) button one last time. This saves the new value and takes you to the next programming option.
   2. Press the PERM PRESS WARM button, and the washer will revert to Ready Mode.