Coin #1 TopOff Time in Seconds (1toS)

This option lets you set the amount of topoff time added in seconds. It is the sum of topoff time in minutes and seconds expressed as seconds. It is only available for software versions S003 and higher. 

1. Enter Manual Mode: Follow the steps in the “Entering Manual Mode” section. 
2. Access programming: Press LOW TEMP (∧) or DELICATES (∨) until “PrOg” appears in the Four-Digit Display, then press START (enter). “AtS” will appear. 
3. Press LOW TEMP (∧) or DELICATES (∨) to find “1toS,” then press START (enter). 
4. Adjust coin #1 topoff time (seconds): The current number of seconds set for the topoff time will appear in the display. 
5. Use LOW TEMP (∧) or DELICATES (∨) to increase or decrease the number of seconds to the desired value. 
   1. Note: For active topoff, either the coin #1 topoff time in minutes or seconds (or both) must be non-zero. 
   2. Setting both to zero disables topoff, requiring a full cycle purchase to add time. 
   3. The maximum total cycle time (including topoff) is 99 minutes. 
   4. The default value is 0 seconds. 
6. Save changes: Press START (enter) when the correct number of seconds is displayed. “C2tO” (Coin #2 TopOff Time [Minutes Per Coin]) will appear next. 
7. To exit programming: Ensure an option is displayed (not a value). Press and hold HIGH TEMP and MED TEMP simultaneously. The control will return to its previous mode.