Coin #1 TopOff Time in Minutes per Coin (C1tO)

This lets you set the amount of topoff time added in minutes for coin 1. 

1. Enter Manual Mode: Follow the steps in the “Entering Manual Mode” section. 
2. Access programming: Press LOW TEMP (∧) or DELICATES (∨) until “PrOg” appears in the Four-Digit Display, then press START (enter). “AtS” will appear. 
3. Press LOW TEMP (∧) or DELICATES (∨) to find “C1tO,” then press START (enter). 
4. Adjust coin #1 topoff time (minutes): The current number of minutes set for the topoff time will appear in the display. 
5. Use LOW TEMP (∧) or DELICATES (∨) to increase or decrease the number of minutes to the desired value. 
6. For active topoff, the coin #1 time can be set from 1 to 99 minutes. 
7. Setting it to 0 minutes disables topoff, requiring a full cycle purchase to add time. 
8. The maximum total cycle time (including topoff) is 99 minutes. 
9. The default value is 10 minutes. 
10. Save changes: Press START (enter) when the correct number of minutes is displayed. 
11. If seconds are enabled, “1toS” (Coin #1 TopOff Time [Seconds Per Coin]) will appear next. This option is only available for software versions S003 and higher. 
12. If seconds are not enabled, “C2tO” (Coin #2 TopOff Time [Minutes Per Coin]) will appear next. 
13. To exit programming: Ensure an option is displayed (not a value). Press and hold HIGH TEMP and MED TEMP simultaneously. The control will return to its previous mode.