Coin #1 Amount (dEn1)

This option lets you set the value of the coin that is entered. For example, to set a quarter to be worth $0.25, you would set the coin amount to 0025. 

1. Enter Manual Mode: Follow the steps in the “Entering Manual Mode” section. 
2. Access programming: Press LOW TEMP (∧) or DELICATES (∨) until “PrOg” appears, then press START (enter). “AtS” will appear. 
3. Select “dEn1” option: Use LOW TEMP (∧) or DELICATES (∨) to find “dEn1,” then press START (enter). 
4. Adjust Coin #1 amount: The rightmost digit will flash. Use LOW TEMP (∧) to increase or DELICATES (∨) to decrease the value. 
   1. Coin amounts can be set between 0 and 9999. The default Coin #1 amount is 25.
5. Press START (enter) to save the digit and move to the next one. 
6. Repeat for all four digits. 
7. Once all 4 digits have been entered and you press START (enter) for the last time, the new Coin #1 amount will be saved, and the display will show “dEn2” (Coin #2 Amount). 
8. To exit programming: Ensure an option is displayed (not a value). Press and hold HIGH TEMP and MED TEMP simultaneously. The control will return to its previous mode.