EDC Washer Controls, SC Series

Mountain Electronics, Inc.

QUICK GUIDES

CHANGING PRICE (MANUALLY)

VEND PRICE CHANGE

Note: Washer must be in “Ready” mode with loading door latched (closed). Make sure no coins have been entered, and the control is not in an active cycle.

1. Open access panel.
2. Press and hold NORMAL, then press HOT.
3. “SPC” will appear on display.
4. Press and hold PERM PRESS, then press COLD.
5. “+001” will appear on display.
6. Press DELICATES (+) or COLD (-) to scroll through options until “+002” is displayed (Hot Wash Vend Price).
7. Press PERM PRESS. The first digit of the current vend price will flash.
8. Press DELICATES (+) or COLD (-) to change the number.
9. Press PERM PRESS to save the number. The next digit will flash.
10. Repeat steps 8 and 9 for each remaining digit in the vend price.
11. When the last digit of the price is entered, the display will advance to the next option, “+003” (Warm Wash Vend Price).
12. Repeat steps 7-10 to set the price.
13. When the last digit of the price is entered, the display will advance to the next option, “+004” (Cold Wash Vend Price).
14. Repeat steps 7-10 to set the price.
15. When the last digit of the price is entered, the display will advance to the next option, “+005”.
16. Press and hold COLD, then press PERM PRESS. Control returns to “Ready” mode.

For more information or to change other settings, see Washer-Extractor Programming Manual (p/n F232032).