Select Page
How Can We Help?

Search for answers or browse our knowledge base.

Documentation | Demos | Support

370518 Unimac Washer

You are here:
← Back

Mountain Electronics, Inc.

QUICK GUIDES

UNIMAC PRICE SETTING – 370518

VER: CN21, 25c COIN, 1 Price.

The touchpads for various models are labeled as follows:

They are numbered 1-4 from left to right.

The #1 button is labeled HOT or WHITE.                           (program cycle)

The #2 button is labeled WARM or PERM PRESS.                   (selects next item)

The #3 button is labeled COLD or COLORS.                         (raises value)

The #4 button is labeled DELICATE or BRIGHT COLORS.          (lowers value)

 

PROCEDURE:

  1. SET PROGRAM SWITCH TO PROGRAMMING POSITION.

The display should read PRO.

  1. PUSH #4.

The display should read NORM      (TEST is a diagnostic machine cycle)

#4 Toggles between NORM and TEST. (Don’t leave it in TEST)

  1. PUSH#2.

The display should read PAY.

#4 Toggles between PAY and FREE.

  1. PUSH#2.

The display should read S3.

#4 Toggles between S3 and COIL.

  1. PUSH#2.

The display should read 1ATS.        (1ATS single price for all selections)

#4 Toggles between 1ATS and 4ATS.    (4ATS separate price for each selection)

  1. PUSH#2.

The display should read COIN, then DEN, then 25

This is the coin denomination. It should be 25. (Quarter)

To increase push #3. To decrease push #4.

  1. PUSH#2.

The display should read ATS1, then display the price. For instance, 200 is $2.00

To increase push #3. To decrease push #4.

  1. PUSH#2

Display back to PRO

  1. SET PROGRAM SWITCH TO NORMAL POSITION

 

Table of Contents